AMSOIL Premium Synthetic Marine Oil

Preferred Customer Registration Product ImageWarranty Secure

HP Marine Synthetic 2-Stroke Oil Product Image

HP Marine Synthetic 2-Stroke Oil

Product Code: HPMQT-EA

Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil). Helps prevent deposits, protects against wear, has low smoke, protects against rust and has low aquatic toxicity. Superior performance as an injection oil or at 50:1 pre-mix.

High-quality motor oil is critical for maximum performance in modern two-stroke marine motors. Direct fuel injection (DFI) improves combustion efficiency, delivering the extra power enthusiasts want, while leaner gas-to-oil ratios provide the reduced exhaust emissions the government mandates. The leaner ratio leaves less oil to lubricate and protect these hotter, more powerful motors, which invites deposits and wear that threaten engine performance and life. HP Marine is proven to excel in these harsh conditions. It controls performance-robbing friction, heat and wear, yet produces low smoke and has low aquatic toxicity properties. It's an oil as advanced as the engines it protects.

  • Excellent for Evinrude® E-TEC™ factory-lean setting (replaces Evinrude XD100™ 2-Cycle Oil)
  • Helps prevent deposits
  • Protects against wear
  • Low smoke
  • Protects against rust
  • Low aquatic toxicity
  • Superior performance as an injection oil or at 50:1 pre-mix

AMSOIL 10W-30 Synthetic Marine Engine Oil Product Image

AMSOIL 10W-30 Synthetic Marine Engine Oil

Product Code: WCTQT-EA

AMSOIL Synthetic Marine Engine Oil is a premium synthetic formulation designed to withstand the heat and stress of high-rpm operation and deliver excellent wear protection. It protects against rust and corrosion during periods of inactivity and long-term storage to keep your engine protected, even when it’s not running. Synthetic Marine Engine Oil is perfect for hardcore anglers and boating enthusiasts who demand the best protection for their marine engines.

Fights Engine Wear
AMSOIL Synthetic Marine Engine Oil's naturally strong base oils resist viscosity loss due to mechanical shear. The oil develops a tough lubricating film that protects engine parts, even in high-heat, high-rpm conditions that breakdown other oils. Synthetic Ma-rine Engine Oil contains robust anti-wear additives that further reduce wear in metal-to-metal contact regions, guarding against compression loss for maximum power and extending the lives of marine engines.

Excellent Anti-Rust Performance
Good rust protection is not natural to motor oil; it comes only by design. AMSOIL Synthetic Marine Engine Oil is fortified with potent inhibitors that guard against damaging rust and corrosion. It protects engines during use and during inactivity or long-term storage.

  • Excellent high-stress, high-rpm endurance
  • Increased rust and corrosion protection
  • NMMA FC-W Catalyst Compatible

NMMANMMA Certified
Synthetic Marine Engine Oil is certified by the National Marine Manufacturers Associa-tion (NMMA) for use in four-stroke outboard motors. This high-quality oil demonstrates outstanding performance and meets the requirements of the NMMA FC-W Catalyst Compatible specification, which is backward-compatible with the FC-W specification.

APPLICATIONS
Use in gasoline-fueled four-stroke inboards, outboards, inboard/outboards and personal watercraft, including those made by Honda*, Mercury*, Yamaha*, Johnson/Evinrude*, Bombardier/BRP*, Suzuki*, Nissan*, Tohatsu*, OMC*, Volvo-Penta*, Mercruiser*, Chevrolet* and Ford*.

NMMA FC-W Catalyst Compatible • API SM

  • 10W-30 — FC-W (CAT)® Registration Number: FC-00833T

AMSOIL 10W-40 Synthetic Marine Engine Oil Product Image

AMSOIL 10W-40 Synthetic Marine Engine Oil

Product Code: WCFQT-EA

AMSOIL Synthetic Marine Engine Oil is a premium synthetic formulation designed to withstand the heat and stress of high-rpm operation and deliver excellent wear protection. It protects against rust and corrosion during periods of inactivity and long-term storage to keep your engine protected, even when it’s not running. Synthetic Marine Engine Oil is perfect for hardcore anglers and boating enthusiasts who demand the best protection for their marine engines.

Fights Engine Wear
AMSOIL Synthetic Marine Engine Oil's naturally strong base oils resist viscosity loss due to mechanical shear. The oil develops a tough lubricating film that protects engine parts, even in high-heat, high-rpm conditions that breakdown other oils. Synthetic Ma-rine Engine Oil contains robust anti-wear additives that further reduce wear in metal-to-metal contact regions, guarding against compression loss for maximum power and extending the lives of marine engines.

Excellent Anti-Rust Performance
Good rust protection is not natural to motor oil; it comes only by design. AMSOIL Synthetic Marine Engine Oil is fortified with potent inhibitors that guard against damaging rust and corrosion. It protects engines during use and during inactivity or long-term storage.

  • Excellent high-stress, high-rpm endurance
  • Increased rust and corrosion protection
  • NMMA FC-W Catalyst Compatible

NMMANMMA Certified
Synthetic Marine Engine Oil is certified by the National Marine Manufacturers Associa-tion (NMMA) for use in four-stroke outboard motors. This high-quality oil demonstrates outstanding performance and meets the requirements of the NMMA FC-W Catalyst Compatible specification, which is backward-compatible with the FC-W specification.

  • 10W-40 — FC-W (CAT)® Registration Number: FC-00850T

APPLICATIONS
Use in gasoline-fueled four-stroke inboards, outboards, inboard/outboards and personal watercraft, including those made by Honda*, Mercury*, Yamaha*, Johnson/Evinrude*, Bombardier/BRP*, Suzuki*, Nissan*, Tohatsu*, OMC*, Volvo-Penta*, Mercruiser*, Chevrolet* and Ford*.

NMMA FC-W Catalyst Compatible • API SM

25W-40 Synthetic Blend Marine Engine Oil Product Image

25W-40 Synthetic Blend Marine Engine Oil

Product Code: WCMQT-EA

Engine performance and reliability are key to a successful day fishing or boating. High-rpm operation and constant exposure to water, however, invite engine wear and formation of rust and corrosion, reducing engine performance and life. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil guards against wear while delivering excellent protection against rust and corrosion. It is Warranty Secure® and will not void your marine engine’s warranty.

Protects Against Wear
Marine engines operate under high loads and rpm for extended periods. On average, a marine engine powering a boat 30 mph runs at about 5,000 rpm. In contrast, an automotive engine powering a car 60 mph runs at about 2,000 rpm. Higher stress causes traditional automotive oils to break down and lose viscosity. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil is designed with excellent shear stability to deliver a consistent lubricating film. It helps guard engine components from wear for maximum life.

Excellent Anti-Rust Performance
Marine engines are prone to rust and corrosion due to constant exposure to humid, wet environments. Rust on engine parts acts like sandpaper, scouring bearings, the cylinder wall, piston rings and other components, while aluminum pistons and other parts can corrode. Rust and corrosion reduce engine power and eventually cause catastrophic failure.

Good rust protection is not natural to motor oil; it comes only by design. AMSOIL 25W-40 Synthetic Blend Marine Engine Oil is fortified with potent inhibitors that guard against damaging rust and corrosion.

  • Excellent high-stress, high-rpm endurance
  • Increased rust and corrosion protection

NMMA Certified
AMSOIL 25W-40 Synthetic Blend Marine Engine Oil is certified by the National Marine Manufacturers Association (NMMA) for use in four-stroke outboards, inboards, stern-drives (inboard/outboards) and PWC. This high-quality oil demonstrates outstanding performance and exceeds the NMMA “FC-W” (Four Cycle – Water) specification requirements.

  • FC-W (CAT)® Registration Number: FC-11825T

* All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are AMSOIL-engineered for use in the applications shown.

APPLICATIONS
Use in gasoline-fueled four-stroke inboards, outboards, inboard/outboards and personal watercraft that require any of the specifications listed below, including those made by Mercury* and Mercruiser*.

  • API SM
  • NMMA FC-W Catalyst Compatible

Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil Product Image

Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil

Product Code: ATOBC-EA

Designed for pre-mix applications as lean as 100:1 ratios or richer. Improves throttle response and lowers or eliminates smoke. Minimizes deposit formation and lowers emissions. Performance emphasis on the cooler operations of water-cooled motors.

Specifically designed for outboard motors, Outboard 100:1 Pre-Mix Synthetic 2-Stroke Oil contains a heavy dose of low-temperature dispersant additives that excel at reducing varnish, carbon and deposit formation in water-cooled motors. Its low-smoke, low-odor, low-toxicity properties produce fewer emissions at 100:1 mix ratios than oils mixed at 50:1, benefitting operators and the environment. Outboard Synthetic 2-Stroke Oil is formulated to prevent "oil loading" and plug fouling for rapid throttle response, making it ideal for trolling motors.

AMSOIL Synthetic 2-Stroke Oil has been providing improved performance and protection in two-stroke engines since 1973. Trust the extensive experience of AMSOIL, The First in Synthetics®, to do the best job protecting your engine.

Engine Protection
Outboard Synthetic 2-Stroke Oil provides premium protection and performance at 100:1 mix ratios. It is formulated for hot-operating two-stroke outboard motors, effectively fighting carbon and deposit formation and preventing ring sticking.

Smokeless Operation
Outboard Synthetic 2-Stroke Oil’s synthetic formulation burns cleanly. When mixed at 100:1, smoke is virtually undetectable. Boaters subjected to smoke and fumes benefit from these low-emission properties.

  • Excellent lubricity and cleanliness properties
  • Controls friction and helps prevent wear, plug fouling, ring sticking and exhaust port blocking
  • Improves throttle response
  • Lowers or eliminates smoke
  • Delivers outstanding protection and performance at lean mix ratios
  • Anti-rust formulation counteracts the damp environments often encountered in outboard applications

APPLICATIONS
For pre-mix use in two-stroke outboard motors, personal watercraft and jet boats that specify TC-W3. For maximum performance, mix with gasoline at 100:1 regardless of the mix ratio specified for the equipment. Richer mix ratios may be used where desired.

RATIO OIL FUEL
50:1 2.6 oz. 1 U.S. GALLON
80:1 8.0 oz. 5 U.S. GALLONS
100:1 8.0 oz. 6 U.S. GALLONS

 

Serving Customers in the United States and Canada

13 Distribution Centers throughout North America